SignalTap

Learn to Analyze the Captured Signals, Practice the Use of SignalTap Logic Analyzer in Quartus – SignalTap – Altera Risc-V Board PRA040 Experimental 2

November 18, 2020May 17, 2021 SteveGuysAltera, Analyze the Captured Signals, Logic Analyzer in Quartus, PRA040 Experimental, Practice the Use of SignalTap, Risc-V Board, SignalTap

Experiment 2 SignalTap 2.1 Experiment Objective Continue to practice the use of the development board hardware; Practice the use of SignalTap Logic Analyzer in Quartus; Learn to analyze the captured signals. 2.2 Experiment Implement Use switches to control the LED light on and off Capture and analyze the switching signals on the development board through the use of SignalTap. 2.3 Experiment 2.3.1 Introduction of DIP Switches and SignalTap Introduction of switches The on-board switch is 8 DIP switches, as shown in Figure 2.1. The switch is used to switch the…

Experimental Manuals FPGA Board Based FPGA for Beginners FPGA Tutor PRA006/PRA010

The Use of SignalTap Logic Analyzer, Analyze the Captured Signals – FPGA Beginner Study Board PRA006, PRA010 Experiment 2

November 16, 2020January 6, 2021 SteveGuysAnalyze the Captured Signals, FPGA Beginner, Logic Analyzer, PRA006, PRA010, SignalTap, Study Board

Experiment 2 SignalTap 2.1 Experiment Objective Continue to practice using of the development board hardware; Practice the use of SignalTap Logic Analyzer in Quartus; Learn to analyze the captured signals. 2.2 Experiment Implement Capture and analyze the switching signals on the development board through the use of SignalTap. 2.3 Experiment 2.3.1 Introduction to the Switches and SignalTap Introduction to the switches The on-board switch is 8 DIP switches, as shown in Figure 2.1. The switch is used to switch the circuit by turning the switch handle using the binary coding…