FII RISC-V3.01 CPU FII-PRA040 Risc-V Risc-V Core

Learn to Analyze the Captured Signals, Practice the Use of SignalTap Logic Analyzer in Quartus – SignalTap – Altera Risc-V Board PRA040 Experimental 2

Experiment 2 SignalTap 2.1 Experiment Objective Continue to practice the use of the development board hardware; Practice the use of SignalTap Logic Analyzer in Quartus; Learn to analyze the captured signals. 2.2 Experiment Implement Use switches to control the LED light on and off Capture and analyze the switching signals on the development board through the use of SignalTap. 2.3 Experiment 2.3.1 Introduction of DIP Switches and SignalTap Introduction of switches The on-board switch is 8 DIP switches, as shown in Figure 2.1. The switch is used to switch the…

Read More
Experimental Manuals FII RISC-V3.01 CPU FII-PRA040 FPGA Tutor Risc-V Risc-V Core

Master the Design of the Frequency Divider to Implement the Shifting – LED LED Shifting – Altera Risc-V Board PRA040 Experimental 1

Experiment 1 LED shifting 1.1 Experiment Objective Practice to use Quartus II to create new projects and use system resources IP Core; Proficiency in the writing of Verilog HDL programs to develop a good code writing style; Master the design of the frequency divider to implement the shifting LED; Combine hardware resources to perform FPGA pin assignment and implement actual program downloading; Observe the experiment result and summarize it. 1.2 Experiment Implement Use all LEDS, all light up during reset; End reset, LED lights from low to high (from right…

Read More