Logic Analyzer

The Use of SignalTap Logic Analyzer, Analyze the Captured Signals – FPGA Beginner Study Board PRA006, PRA010 Experiment 2

Analyze the Captured Signals, FPGA Beginner, Logic Analyzer, PRA006, PRA010, SignalTap, Study Board

Experiment 2 SignalTap 2.1 Experiment Objective Continue to practice using of the development board hardware; Practice the use of SignalTap Logic Analyzer in Quartus; Learn to analyze the captured signals. 2.2 Experiment Implement Capture and analyze the switching signals on the development board through the use of SignalTap. 2.3 Experiment 2.3.1 Introduction to the Switches and SignalTap Introduction to the switches The on-board switch is 8 DIP switches, as shown in Figure 2.1. The switch is used to switch the circuit by turning the switch handle using the binary coding…

FPGA for Beginners FPGA Tutor Pocket Boards PRA006/PRA010

Switch and Use SignalTap II Logic Analyzer in Quartus ( Verilog HDL code ), Learn to analyze the captured signals – FPGA for Beginner Tutorial – Experiment 2 – FII-PRA006

Logic Analyzer, Quartus II, SignalTap II, Switch, switch schematics, Verilog HDL code

2.1 Experiment Objective Continue to practice using the develop board Use SignalTap II Logic Analyzer in Quartus Use FPGA configuration memory to program 2.2 Experiment Requirement By using SignalTap II, learn to analyze and capture the experimental signals. 2.3 Experiment 2.3.1 Project Building Refer to Experiment1, the following experiment project building steps will be eliminated. 2.3.2 PCB Schematics 2.3.3 Experiment Procedure We include the PLL1 generated in Experiment 1 Verilog HDL code is as follows: 2.3.4 SignalTap II Logic Analyzer Step 1: SignalTap II startup and basic setup Tools >…