Experimental Manuals FPGA Board Based FPGA for Beginners PRA006/PRA010

Building new FPGA Projects in Quartus, Device Selection, PLL setup, PLL Frequency Setting, Verilog’s Tree Hierarchy Design, and the Use of SignalTap II – Block/SCH Experiment – FPGA Beginner Study Board PRA006, PRA010 Experiment 4

Experiment 4 Block/SCH Experiment 4.1 Experiment Objective Review building new FPGA projects in Quartus, device selection, PLL setup, PLL frequency setting, Verilog’s tree hierarchy design, and the use of SignalTap II Master the design method of graphics from top to bottom Combined with the BCD_counter project to achieve the display of the digital clock Observe the experimental results 4.2 Experiment Implement Use schematics design to build the project 4.3 Experiment This experiment is mainly to master another design method. The other design contents are basically the same as the experiment…

Read More
Altera Risc-V FPGA Tutorial : Segment Display
Experimental Manuals FPGA Tutor Risc-V

Building FPGA projects in Quartus, device selection, PLL creation, PLL frequency setting, Verilog’s tree hierarchy design, and the use of SignalTap II, Block/SCH – FII-PRA040 Risc-V FPGA Board Experimental 4

Experiment 4 Block/SCH 4.1 Experiment Objective Review building new FPGA projects in Quartus, device selection, PLL creation, PLL frequency setting, Verilog’s tree hierarchy design, and the use of SignalTap II Master the design method of graphics from top to bottom Combined with the BCD_counter project to achieve the display of the digital clock Observe the experimental results 4.2 Experiment Implement Use schematics design to build the project. 4.3 Experiment This experiment is mainly to master another design method. The other design contents are basically the same as the experiment 3,…

Read More
Altera Risc-V FPGA Board
Experimental Manuals FII-PRA040 FII-PRX100-S FII-PRX100D FPGA Tutor Risc-V

use Quartus II to create projects,FPGA pin assignment, program downloading, writing of Verilog HDL programs, Altera Risc-V FPGA Tutorial : LED shifting – FII-PRA040 FPGA Board Experimental 1

Experiment 1 LED shifting 1.1 Experiment Objective Practice to use Quartus II to create new projects and use system resources IP Core; Proficiency in the writing of Verilog HDL programs to develop a good code writing style; Master the design of the frequency divider to implemnet the runing LED; Combine hardware resources to perform FPGA pin assignment and implement actual program downloading; Observe the experiment result and summarize it. 1.2 Experiment Implement Use all LEDS, all light up during reset; End reset, LED lights from low to high (from right…

Read More