Tag: SignalTap II

Experimental Manuals FPGA Board Based FPGA for Beginners PRA006/PRA010

Building new FPGA Projects in Quartus, Device Selection, PLL setup, PLL Frequency Setting, Verilog’s Tree Hierarchy Design, and the Use of SignalTap II – Block/SCH Experiment – FPGA Beginner Study Board PRA006, PRA010 Experiment 4

, , , , , , , ,

Experiment 4 Block/SCH Experiment 4.1 Experiment Objective Review building new FPGA projects in Quartus, device selection, PLL setup, PLL frequency setting, Verilog’s tree hierarchy design, and the use of SignalTap II Master the design method of graphics from top to bottom Combined with the BCD_counter project to achieve the display of the digital clock Observe the experimental results 4.2 Experiment Implement Use schematics design to build the project 4.3 Experiment This experiment is mainly to master another design method. The other design contents are basically the same as the experiment…

Read More
Altera Risc-V FPGA Tutorial : Segment Display
Experimental Manuals FPGA Tutor Risc-V

Building FPGA projects in Quartus, device selection, PLL creation, PLL frequency setting, Verilog’s tree hierarchy design, and the use of SignalTap II, Block/SCH – FII-PRA040 Risc-V FPGA Board Experimental 4

, , , , , , ,

Experiment 4 Block/SCH 4.1 Experiment Objective Review building new FPGA projects in Quartus, device selection, PLL creation, PLL frequency setting, Verilog’s tree hierarchy design, and the use of SignalTap II Master the design method of graphics from top to bottom Combined with the BCD_counter project to achieve the display of the digital clock Observe the experimental results 4.2 Experiment Implement Use schematics design to build the project. 4.3 Experiment This experiment is mainly to master another design method. The other design contents are basically the same as the experiment 3,…

Read More
signal Tap Setting
FPGA for Beginners FPGA Tutor Pocket Boards PRA006/PRA010

Switch and Use SignalTap II Logic Analyzer in Quartus ( Verilog HDL code ), Learn to analyze the captured signals – FPGA for Beginner Tutorial – Experiment 2 – FII-PRA006

, , , , ,

2.1 Experiment Objective  Continue to practice using the develop board  Use SignalTap II Logic Analyzer in Quartus Use FPGA configuration memory to program 2.2 Experiment Requirement By using SignalTap II, learn to analyze and capture the experimental signals. 2.3 Experiment 2.3.1 Project Building Refer to Experiment1, the following experiment project building steps will be eliminated. 2.3.2 PCB Schematics 2.3.3 Experiment Procedure We include the PLL1 generated in Experiment 1 Verilog HDL code is as follows: 2.3.4 SignalTap II Logic Analyzer Step 1: SignalTap II startup and basic setup Tools >…

Read More