FPGA Board Based RF Transceivers USRP

What is the features and benefits of your FII-BD9361 (AD-FMCOMMS3-EBZ compatible ) boards ?

What is the FII-BD9361 Features:

We support all features of AD-FMCOMMS3-EBZ such as:

  1. TX band: 47 MHz to 6.0 GHz
  2. RX band: 70 MHz to 6.0 GHz
  3. Bandwidth Adjustment Range: 200 kHz to 56 MHz
  4. Low noise figure: 2dB NF(noise figure/800MHz )
  5. LO ,RX Gain Control,AGC
  6. 2.4Hhz local oscillator (LO) step
  7. For more information, please check ad9361 introduction.
AD-FMCOMMS3-EBZ
AD-FMCOMMS3-EBZ

What is the benefits of AD-FMCOMMS3-EBZ ( Compatible with FII-BD9361)

  1. Software tunable across wide frequency range : TX :47 MHz to 6 GHz RX:70 MHz to 6 GHz

  2. Software tunable bandwidth: 200 kHz to 56 MHz.

  3. Software tunable TX Power and RX Dynamic Range:TX>80dB RX>70dB

  4. Powered up from single standard FMC connector

  5. Supports MIMO radio,2 ways TX and 2 ways RXMax 4T4R by RF Switches configuration

  6. Supports FII-7030 and other standard FMC Connector Platform software radio application

  7. TX Power higher, Broadband flatness is better.

AD-FMCOMMS3-EBZ
AD-FMCOMMS3-EBZ

FII-BD9361 Applications

      1. General purpose design  for any software-designed radio application
      2. MIMO radio
      3. Point to point communication systems
      4. Femtocell/picocell/microcell base stations
      5. USRP
      6. 3G/4G signal and protocol analysis
      7. WiFi
      8. ISM

Compatible Boards

AD-FMCOMMS3-EBZ  (FII-BD9361 the same as )

(https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/eval-ad-fmcomms3-ebz.html#eb-overview)

Support Boards

ZC702
ZC706
Zedboard
FII-PE7030

Buy Cyclone-10 FPGA Development Board
Buy BD9361 FPGA Development Board
Visited 1 times, 1 visit(s) today

Related posts