IIC Protocol Transmission

asynchronous IIC bus, and the IIC communication protocol， reading and writing EEPROM – zynq xc7z030 board – FII-PE7030 Experiment 11 – IIC Protocol Transmission

Experiment, FII-PE7030, IIC Protocol Transmission, zynq xc7z030 board

Experiment 11 IIC Protocol Transmission 11.1 Experiment Objective Learning the basic principles of asynchronous IIC bus, and the IIC communication protocol Master the method of reading and writing EEPROM Joint debugging using logic analyzer 11.2 Experiment Implement Correctly write a number to any address in the EEPROM (this experiment writes to the register of 8’h03 address) through the FPGA (here changes the written 8-bit data value by (SW7~SW0)). After writing in successfully, read the data as well. The read data is displayed directly on the segment display. Download the program…

Experimental Manuals FPGA Tutor PRX100 Risc-V

Learning the basic principles of the different IIC bus, mastering the IIC communication protocol, Xilinx Risc-V Board Tutorial : IIC Protocol Transmission – FII-PRX100 FPGA Board Experiment 12

IIC Protocol Transmission, PTX100, Risc-V, SDA

Experiment 12 IIC Protocol Transmission 1.Experiment Objective There is an IIC interface EEPROM chip 24LC02 in the test plate, capacity sized 2 kbit (256 bite). Since the data is not lost after the EEPROM is powered down, users can store some hardware setup data or user information. Learning the basic principles of the different IIC bus, mastering the IIC communication protocol Master the method of reading and writing EEPROM Joint debugging using logic analyzer 2.Experiment Requirement Correctly write a number to any address in the EEPROM (this experiment writes to…